







Kiwi Premium Wheat Nubuck 6" Water Resistant Work Boots [61100]
61110
FitTrue to size. Order your usual size.
Based on 11 customer reviews.
Free shipping on orders over $100. You're $100 away from free shipping. Your order ships free.
Same-day shipping on orders placed Monday to Friday before 3PM.
Free 30-day returns.
A 6-inch wheat nubuck soft toe work boot for men and women, with Goodyear welt construction, for work that calls for a tough, comfortable boot but not a safety toe.
The upper is water-resistant wheat nubuck leather, built to hold up to daily wear on the job site and in bad weather. Dense, precision-stitched seams and a tightly built upper resist water penetration and help keep feet dry in light rain and wet or muddy conditions.
This boot meets ASTM F2892-24 for soft toe footwear and is rated EH [Electrical Hazard] and ASTM F2892-24 SR [Slip Resistant]. It has no protective toe cap, so it gives no impact or compression protection.
Tested to ASTM F2892-24 EH: 18,000 V AC at 60 Hz for 1 minute with no more than 1.0 mA leakage.
Underneath, a Goodyear welt stitches the upper to a heavy-duty GripTrek™ oil resistant rubber lug outsole for traction and stability on a wide range of surfaces. A steel shank runs through the midfoot to support the arch on ladder rungs and uneven ground. Because the sole is stitched on, a cobbler can resole the boots when the tread wears down.
Inside, a breathable mesh lining and an extra-cushioned mesh + PU insole handle comfort and moisture over long shifts. The insole lifts out, so you can fit your own orthotic. For added warmth in cold environments, the boot is equipped with 200g 3M™ Thinsulate™ insulation that meets OEKO-TEX® STANDARD 100. It keeps insulating even when damp, without adding bulk. The breathable lining keeps the boot easy to wear when the weather warms up.
Seven reinforced metal eyelets let you lace the boot as snug or as loose as you like. The padded 6-inch shaft holds the ankle steady and cuts fatigue on long days. Width: D [Standard]. A rear pull tab makes the boots easy to pull on.
Sized in US men's 5 to 12 in half sizes, plus 13, which fits women's 6.5 to 13.5, plus 14.5. The box label shows both sizes.
EH protection is reduced when the boots are wet or as the outsole wears. Do not wear this boot where a protective safety toe is required.
-
Insulation Thinsulate® 200g
Specifications and standards
Standards this product meets
- ASTM F2892-24 Compliant Soft Toe
- ASTM F2892-24 EH Rated [Electrical Hazard Protection]
- ASTM F2892-24 SR Rated [Slip Resistant]
At a glance
Ratings come from the manufacturer's testing to the standards listed. A rating tells you what the product was tested to do, not whether it is right for a specific task.
Size Chart
| Men's Size | Women's Size | Foot Length [inches] | Foot Length [centimeters] | Width |
| 5 | 6.5 | 9.65 in | 24.50 cm | Standard [D] |
| 5.5 | 7 | 9.80 in | 24.90 cm | Standard [D] |
| 6 | 7.5 | 9.96 in | 25.30 cm | Standard [D] |
| 6.5 | 8 | 10.12 in | 25.70 cm | Standard [D] |
| 7 | 8.5 | 10.28 in | 26.10 cm | Standard [D] |
| 7.5 | 9 | 10.43 in | 26.50 cm | Standard [D] |
| 8 | 9.5 | 10.59 in | 26.90 cm | Standard [D] |
| 8.5 | 10 | 10.75 in | 27.30 cm | Standard [D] |
| 9 | 10.5 | 10.91 in | 27.70 cm | Standard [D] |
| 9.5 | 11 | 11.06 in | 28.10 cm | Standard [D] |
| 10 | 11.5 | 11.22 in | 28.50 cm | Standard [D] |
| 10.5 | 12 | 11.38 in | 28.90 cm | Standard [D] |
| 11 | 12.5 | 11.54 in | 29.30 cm | Standard [D] |
| 11.5 | 13 | 11.69 in | 29.70 cm | Standard [D] |
| 12 | 13.5 | 11.85 in | 30.10 cm | Standard [D] |
| 13 | 14.5 | 12.17 in | 30.90 cm | Standard [D] |
Women's sizing: Kiwi boots are unisex. Select the women's size shown; the matching unisex pair ships labeled in men's sizing.
Inventory
| Variant | SKU | Barcode | Availability |
|---|---|---|---|
| M 5 [W 6.5] | 61110 | 810189890008 | In stock |
| M 5.5 [W 7] | 61111 | 810189890015 | In stock |
| M 6 [W 7.5] | 61112 | 810189890022 | In stock |
| M 6.5 [W 8] | 61113 | 810189890039 | In stock |
| M 7 [W 8.5] | 61114 | 810189890046 | In stock |
| M 7.5 [W 9] | 61115 | 810189890053 | In stock |
| M 8 [W 9.5] | 61116 | 810189890060 | In stock |
| M 8.5 [W 10] | 61117 | 810189890077 | In stock |
| M 9 [W 10.5] | 61118 | 810189890084 | Out of stock |
| M 9.5 [W 11] | 61119 | 810189890091 | In stock |
| M 10 [W 11.5] | 61120 | 810189890107 | Out of stock |
| M 10.5 [W 12] | 61121 | 810189890114 | Out of stock |
| M 11 [W 12.5] | 61122 | 810189890121 | Out of stock |
| M 11.5 [W 13] | 61123 | 810189890138 | Out of stock |
| M 12 [W 13.5] | 61124 | 810189890145 | Out of stock |
| M 13 [W 14.5] | 61126 | 810189890169 | Out of stock |
FAQ
This is a soft toe boot built to ASTM F2892-24 for occupational footwear, and it carries EH electrical hazard protection. It does not have a protective safety toe. If you need impact and compression protection, choose a steel toe or composite toe style in this line.
No. This is a soft toe boot with no reinforced cap, for jobs that do not require a protective toe and when you want a lighter, more flexible boot. If you need impact and compression protection, choose a steel toe or composite toe style.
These are water resistant. They shed light rain and splashes, but they are not sealed for standing water. For a fully waterproof boot, look for our DryVault™ styles.
Yes. These boots are ASTM F2892-24 SR [Slip Resistant], tested on wet surfaces. The GripTrek™ outsole compound also resists oil.
Wipe off dirt with a damp cloth and let the boots air dry away from direct heat. Brush the nubuck with a suede and nubuck brush once it is dry. Do not use smooth leather conditioner. Do not dry wet boots on a heater or radiator, since fast heat stiffens the leather.
Order your normal shoe size and wear the work socks you plan to use on the job. If you are between sizes or wear thick socks, size up a half size. Full size and fit details are on this page.
Don't see the answer you are looking for? Contact us
- Comfort
- Appearance
- Durability
- Value
- Versatility