Kiwi Wheat steel toe waterproof cap-toe work boots, outside view
Kiwi Wheat steel toe waterproof cap-toe work boots, angled view
Kiwi Wheat steel toe waterproof cap-toe work boots, front view
Kiwi Wheat steel toe waterproof cap-toe work boots, inside view
Kiwi Wheat steel toe waterproof cap-toe work boots, back view
Kiwi Wheat steel toe waterproof cap-toe work boots, pair view
Kiwi Wheat steel toe waterproof cap-toe work boots, sole tread view
Kiwi Wheat steel toe waterproof cap-toe work boots, top view
Kiwi Wheat steel toe waterproof cap-toe work boots, outside view
Kiwi Wheat steel toe waterproof cap-toe work boots, angled view
Kiwi Wheat steel toe waterproof cap-toe work boots, front view
Kiwi Wheat steel toe waterproof cap-toe work boots, inside view
Kiwi Wheat steel toe waterproof cap-toe work boots, back view
Kiwi Wheat steel toe waterproof cap-toe work boots, pair view
Kiwi Wheat steel toe waterproof cap-toe work boots, sole tread view
Kiwi Wheat steel toe waterproof cap-toe work boots, top view
4.7
Rated 4.7 out of 5 stars
4.7 Stars (437 Reviews)

Kiwi Premium Wheat Nubuck 6" Steel Toe Waterproof Cap-Toe Work Boots [64000]

ASTM F2413-24 I/75 C/75 Compliant Steel Toe | EH Rated (Electrical Hazard Protection) | SR Rated (Slip Resistant, ASTM F3445)

64014

$94.50 $149.99
Color Wheat
Kiwi Brown crazy horse steel toe waterproof cap-toe work boots, outside view
Kiwi Wheat steel toe waterproof cap-toe work boots, outside view
Kiwi Black steel toe waterproof cap-toe work boots, outside view
Shoe size M 7 (W 8.5)
Size Chart & Fit Guide

Item is in stock

Adding to Cart Added to Cart

Same-day shipping on orders placed Monday to Friday before 3PM.

Easy, hassle-free returns.

Complete Your Setup

Kiwi Orange A4 cut resistant nitrile coated grip gloves, pair view

Kiwi A4 Cut Resistant Nitrile Palm Coated Polyethylene Blend Knit Orange Grip Gloves [54200]

8   M   Single Pair (Individually Tagged)

$5.99$7.99

 
Kiwi Neon Class 2 hi vis safety vest with contrast trim, front view

Kiwi High Visibility ANSI/ISEA 107-2020, Type R, Class 2 Contrast Trimmed Neon Safety Vest [70100]

Small

$11.70$11.99

 
Kiwi Neon Class 3 hi vis quilt lined safety jacket, front view

Kiwi High Visibility Hooded & Quilt Lined ANSI/ISEA 107-2020, Type R, Class 3 Two Tone Water Resistant Neon Safety Jacket [71300]

Small

$67.50$111.99

 

Built for strength, safety, and all-day comfort, these premium steel toe waterproof work boots are designed to handle the toughest jobsite conditions. Crafted from high-quality waterproof nubuck leather with dense precision stitching and a sealed DryVault™ internal waterproof bootie, they fully block water penetration to keep your feet dry in rain, mud, or hazardous environments.

Featuring an ASTM F2413-24 I/75 C/75 compliant steel toe, these durable safety boots provide proven impact and compression protection against jobsite hazards while maintaining all-day comfort.
A ScuffShield™ reinforced TPU toe cap with a textured rubber exterior adds abrasion resistance and scuff protection in high-wear areas, extending the life of your boots. EH (Electrical Hazard) rated, tested to withstand 18,000 volts AC at 60 Hz for 1 minute with no current leakage exceeding 1.0 mA, offering reliable protection from electrical hazards in compliance with ASTM standards.

The durable Goodyear welt construction and heavy-duty GripTrek™ slip and oil resistant rubber lug outsole provide exceptional traction, stability, and long-lasting performance across uneven, rugged, or slick surfaces. Inside, a breathable mesh lining paired with the sealed DryVault™ waterproof bootie and a cushioned mesh + high-density foam insole delivers superior comfort, moisture control, and support for long shifts on your feet. For added warmth in cold environments, the boot is equipped with 200g 3M™ Thinsulate™ insulation, delivering lightweight thermal protection without added bulk.

The lacing system is designed with 5 reinforced metal eyelets and 2 closed-loop speed hook hybrids, allowing for both traditional lacing or a quick-lace setup, ensuring a secure fit, ankle support, and long-term durability. A 6-inch boot shank mid-cut design with a padded collar enhances stability while reducing fatigue, even in the most demanding conditions.

Perfect for construction, industrial work, and heavy-duty outdoor environments, these waterproof steel toe cap-toe work boots combine rugged durability, compliant protection, and all-day comfort.

Material: Built with high-quality waterproof nubuck leather to provide long-lasting durability, weather resistance, and comfort in demanding conditions.

Waterproof Construction (DryVault™): Engineered with dense precision-stitched seams, a tightly constructed nubuck leather upper, and a sealed DryVault™ internal waterproof bootie to fully block water penetration and keep your feet dry in rain, mud, or wet job site conditions.

Steel Toe Protection: ASTM F2413-24 I/75 C/75 compliant steel toe provides impact and compression protection for industrial-grade safety.

Electrical Hazard Rated: No current flow or leakage in excess of 1.0 mA under the application of 18,000 volts AC at 60 Hz for 1 minute, providing electrical hazard protection in compliance with ASTM standards.

Toe Guard (ScuffShield™): ScuffShield™ reinforces the toe with a TPU cap and a textured rubber exterior for added durability, abrasion resistance, and protection against scuffs and impact in high-wear areas.

Sole Construction (GripTrek™): Features durable Goodyear welt construction and a heavy-duty GripTrek™ slip and oil resistant rubber lug outsole for enhanced traction, stability, and long-lasting performance on a wide range of surfaces.

Comfort & Cushioning: Features a breathable mesh interior lining, a sealed DryVault™ waterproof bootie, and an extra-cushioned mesh + high-density foam insole for all-day comfort, moisture control, and foot support during long shifts. Integrated 200g 3M™ Thinsulate™ Insulation provides cold-weather protection without added bulk.

Lacing System: Built with 5 reinforced metal eyelets and 2 closed-loop speed hook hybrids, allowing users to choose between a traditional lacing method or quick-lace configuration for a customizable fit, secure ankle support, and lasting durability in tough conditions.

Ankle Support & Fit: 6-inch boot shank mid-cut design with a padded collar for enhanced ankle stability, secure fit, and reduced foot fatigue in demanding work conditions.

SKU: 64000

Brand: Kiwi

Color: Wheat

Made in: China

Size Range: 7 - 13

Shaft Height: 6 in

ASTM F2413-24 I/75 C/75 Compliant Steel Toe

EH Rated (Electrical Hazard Protection)

SR Rated (Slip Resistant, ASTM F3445)

Upper: Nubuck Leather, DryVault™ Waterproof Sock, 200g 3M™ Thinsulate™ Insulation, Steel Toe, TPU Toe Cap

Insole: Mesh, High-Density Foam

Outsole: Rubber

Inner Pack: 1 Pair

Inner Weight: 4.4 lbs

Inner Dimensions: 14.2 x 10.2 x 5.5 in [L x W x H]

Case Pack: 6 Packs

Case Weight: 32.0 lbs

Case Dimensions: 21.3 x 17.3 x 15.4 in [L x W x H]

ANSI ASTM F2413-24 safety toe footwear badge - impact and compression 75 rating Steel safety toe work boot badge - steel toe cap protection icon Slip resistant (SR), ASTM F3445 Electrical hazard EH rated work boot badge - electrical shock protection footwear icon Waterproof membrane work boot badge - fully waterproof footwear icon
Kiwi Premium Wheat Nubuck 6 Kiwi Premium Wheat Nubuck 6 Kiwi Premium Wheat Nubuck 6

Specifications and standards

Standards this product meets

  • ASTM F2413-24 I/75 C/75 Compliant Steel Toe
  • EH Rated (Electrical Hazard Protection)
  • SR Rated (Slip Resistant, ASTM F3445)

At a glance

Made in
China
Sizes
7 - 13
Shaft height
6 in
Inner pack
1 Pair
Safety standards guideSize chart for this style Sizing and care Technology and materials Compare footwear Gear by trade
The sheet opens in a new tab. Print it or save it as a PDF from there.

Ratings come from the manufacturer's testing to the standards listed. A rating tells you what the product was tested to do, not whether it is right for a specific task.

Care Instructions:
Hand wash only.
Remove loose dirt with a soft brush, then wipe clean with a damp cloth and mild soap.
Do not machine wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Wipe away road salt promptly with a damp cloth before it dries in.
Once dry, restore the nap with a suede and nubuck brush. Do not apply smooth leather polish or conditioner, which flattens the nap.

Drying & Storage:
Air dry at room temperature away from direct heat and sunlight, as excessive heat may crack leather and weaken adhesives.
Remove the laces and footbed after heavy soaking and allow a full 24 hours to dry.
Store in a clean, dry, ventilated area.

Inspection:
Inspect boots for outsole wear, sole separation, damaged toe protection, or compromised seams and hardware before each use, and remove them from service if protective performance is compromised.

Size Chart

Men's Size Women's Size Foot Length (inches) Foot Length (centimeters) Width
7 8.5 10.28 in 26.11 cm Standard (D)
7.5 9 10.44 in 26.53 cm Standard (D)
8 9.5 10.63 in 27.00 cm Standard (D)
8.5 10 10.79 in 27.40 cm Standard (D)
9 10.5 10.94 in 27.80 cm Standard (D)
9.5 11 11.10 in 28.20 cm Standard (D)
10 11.5 11.28 in 28.65 cm Standard (D)
10.5 12 11.46 in 29.10 cm Standard (D)
11 12.5 11.61 in 29.50 cm Standard (D)
12 13.5 11.95 in 30.35 cm Standard (D)
13 14.5 12.28 in 31.20 cm Standard (D)

Women's sizing: Kiwi boots are unisex. Select the women's size shown; the matching unisex pair ships labeled in men's sizing.

Kiwi work boots are designed and tested to the applicable ASTM F2413-24 or ASTM F2892-24 requirements marked on each product, providing impact, compression, and electrical hazard protection where rated.

For proper protection, select the correct size and lace boots fully to ensure a secure fit and ankle support. Replace boots after any significant impact to the protective toe, even if no damage is visible.

EH rated footwear is designed to reduce the hazard of accidental contact with live electrical circuits, and is tested to withstand 18,000 volts at 60 Hz for one minute with no current leakage under dry conditions. EH protection diminishes with outsole wear, moisture, and contamination, and EH-rated footwear is not a substitute for dielectric footwear.

Slip resistant outsoles reduce, but do not eliminate, the risk of slipping on wet or oily surfaces. Do not modify the footwear or add components that alter its fit or protective performance.

Performance levels cannot be guaranteed if the boot has been damaged by accident, unreasonable use, or neglect. Clean boots only according to the care instructions and do not store them wet or in direct sunlight.

Inspect boots daily. Discontinue use if the outsole tread is worn smooth, the sole separates, the protective toe is exposed or deformed, or seams or hardware are compromised.

Inventory

Variant SKU Barcode Availability
M 7 (W 8.5) 64014 810189895140 In stock
M 7.5 (W 9) 64015 810189895157 In stock
M 8 (W 9.5) 64016 810189895164 In stock
M 8.5 (W 10) 64017 810189895171 In stock
M 9 (W 10.5) 64018 810189895188 In stock
M 9.5 (W 11) 64019 810189895195 In stock
M 10 (W 11.5) 64020 810189895201 In stock
M 10.5 (W 12) 64021 810189895218 In stock
M 11 (W 12.5) 64022 810189895225 In stock
M 12 (W 13.5) 64024 810189895232 In stock
M 13 (W 14.5) 64026 810189895249 In stock

FAQ

Yes. They meet ASTM F2413-24 with a steel safety toe, rated I/75 for impact and C/75 for compression, and they carry EH electrical hazard protection and SR slip resistance. The full rating is listed on this page as ASTM F2413-24 I/75 C/75 Compliant Steel Toe, EH, SR.

A steel toe, built to protect against impact and compression from dropped tools and heavy objects. Steel conducts heat and cold, and it reads on a metal detector. If your site screens for metal, choose style 69200 with the Aferra™ metal-free build, which is built to pass a metal detector.

A DryVault™ waterproof bootie, a sealed inner membrane that keeps water out while your feet stay dry. Combined with the nubuck upper it holds up in rain, mud, and wet job sites.

Yes. These boots are slip resistant (SR), tested to ASTM F3445 on wet surfaces. The GripTrek™ outsole compound also resists oil.

Yes. A ScuffShield™ abrasion guard reinforces the high wear areas so the boots keep their look longer.

Wipe off dirt with a damp cloth and let the boots air dry away from direct heat. Condition the nubuck every few weeks so it does not dry out and crack. Do not dry wet boots on a heater or radiator, since fast heat stiffens the leather.

Order your normal shoe size and wear the work socks you plan to use on the job. If you are between sizes or wear thick socks, size up a half size. Full size and fit details are on this page.

Don't see the answer you are looking for? Contact us

You may also like
Over 3000 5 star reviews
Customers say these boots keep feet dry in wet conditions and provide solid ankle support for long shifts. The composite toe protects effectively, and the wheat nubuck leather ages well with regular brushing. Many reviews highlight durability and comfort after the break-in period, though some note the insole compresses within months and the tongue gusset allows water in deep puddles. Common concerns include narrow width sizing, loose eyelets, and occasional stitching irregularities. Traction on wet surfaces is adequate but not aggressive. Most users praise the value and construction quality, with several reporting these as reliable replacements for higher-priced alternatives.
4.7
Rated 4.7 out of 5 stars
Based on 437 reviews
Total 5 star reviews: 326
Total 4 star reviews: 96
Total 3 star reviews: 15
Total 2 star reviews: 0
Total 1 star reviews: 0
100%would recommend these products
Value for MoneyRated 4.8 on a scale of 1 to 5
Product QualityRated 4.5 on a scale of 1 to 5
SizingRated -0.0 on a scale of minus 2 to 2
ComfortRated 4.6 on a scale of 1 to 5
Write a Review (Opens in a new window)
437 reviews
  • EH
    Edward H.
    Flag of United States
    Verified Buyer
    Reviewing
    Kiwi Premium Wheat Nubuck 6" Composite Toe Waterproof Cap-Toe Work Boots [69000]
    I recommend this product
    Rated 4 out of 5 stars
    4/9/26
    Insole compressed at month 3

    Stock insole flattened. Replaced with my own.

    Value for MoneyRated 5.0 on a scale of 1 to 5
    Product QualityRated 3.0 on a scale of 1 to 5
    SizingRated 0.0 on a scale of minus 2 to 2
    ComfortRated 3.0 on a scale of 1 to 5
    Was this helpful?
  • CC
    Camila C.
    Flag of United States
    Verified Buyer
    Reviewing
    Kiwi Premium Wheat Nubuck 6" Steel Toe Waterproof Cap-Toe Work Boots [64000]
    I recommend this product
    Rated 3 out of 5 stars
    4/3/26
    Insole gave up early

    Insole compressed flat by month 2. Premium boot insole shouldnt do that.

    Value for MoneyRated 3.0 on a scale of 1 to 5
    Product QualityRated 3.0 on a scale of 1 to 5
    SizingRated 0.0 on a scale of minus 2 to 2
    ComfortRated 4.0 on a scale of 1 to 5
    Was this helpful?
  • MG
    Maurice G.
    Flag of United States
    Verified Buyer
    Reviewing
    Kiwi Premium Black Action Leather 6" Steel Toe Waterproof Cap-Toe Work Boots [69700]
    I recommend this product
    Rated 4 out of 5 stars
    3/30/26
    Long break in for premium boot

    Premium line should break in faster. Took 12 days. After that, great.

    Value for MoneyRated 4.0 on a scale of 1 to 5
    Product QualityRated 3.0 on a scale of 1 to 5
    SizingRated 0.0 on a scale of minus 2 to 2
    ComfortRated 4.0 on a scale of 1 to 5
    Was this helpful?
  • ZR
    Zachary R.
    Flag of United States
    Verified Buyer
    Reviewing
    Kiwi Premium Wheat Nubuck 6" Steel Toe Waterproof Cap-Toe Work Boots [64000]
    I recommend this product
    Rated 4 out of 5 stars
    3/30/26
    Long break in for premium

    Should break in faster. Took 12 days.

    Value for MoneyRated 4.0 on a scale of 1 to 5
    Product QualityRated 3.0 on a scale of 1 to 5
    SizingRated 0.0 on a scale of minus 2 to 2
    ComfortRated 3.0 on a scale of 1 to 5
    Was this helpful?
  • BB
    Brian B.
    Flag of United States
    Verified Buyer
    Reviewing
    Kiwi Premium Brown Crazy Horse 6" Composite Toe Waterproof Cap-Toe Work Boots [69100]
    I recommend this product
    Rated 4 out of 5 stars
    3/29/26
    Tongue gusset stops short

    Gusset doesnt go up the full height of the lace area. Some water sneaks in around the top in deep puddles.

    Value for MoneyRated 4.0 on a scale of 1 to 5
    Product QualityRated 3.0 on a scale of 1 to 5
    SizingRated 0.0 on a scale of minus 2 to 2
    ComfortRated 4.0 on a scale of 1 to 5
    Was this helpful?
Show More