Kiwi Foam Latex Palm Coated Polyester Knit Red Grip Gloves [52500]
EN 388: 2131X Compliant
52581
- 50% off shipping after 5 subscription orders
- 60% off shipping after 3 subscription orders
- 40% off shipping after 2 subscription orders
- 30% off shipping after 1 subscription order
Same-day shipping on orders placed Monday to Friday before 3PM.
Easy, hassle-free returns.
Complete Your Setup
A foam latex palm coated work glove for material handling, assembly and maintenance, in a red polyester knit.
The coating runs across the palm and fingers and grips wet or dry. It holds on slick and greasy parts, which is where a plain knit glove gives up, and it resists oil and abrasion through repeated handling.
Compliant with EN 388: 2131X. These are general handling gloves and carry no ANSI/ISEA 105 cut level, so if the job calls for cut protection, look at the A1, A4 or A5 ranges instead.
The knit shell breathes, and the open back keeps air moving so hands stay cooler than they do in a fully coated glove. Seamless knit construction and a snug elastic cuff keep the fit close and keep debris out. The ergonomic shape leaves enough feel in the fingertips for small components and precision assembly work.
Reinforced through the wear points for industrial and mechanical use. Supplied with different color cuffs. Sizes 7/S, 8/M and 9/L, sold in 8 pair packs.
Specifications and standards
Standards this product meets
- EN 388: 2131X Compliant
At a glance
Cut resistance, ANSI/ISEA 105
This glove is not tested to the ANSI/ISEA 105 cut scale. It is built for grip and dexterity rather than cut protection. What the levels mean
The ANSI/ISEA 105 badge. Cut level at the top. X marks a property Kiwi has not tested to ANSI/ISEA 105.
How to read the EN 388 code
Each position in the code is a separate test, so the code is read by position and never as a number. Higher is better within a position. X means that test was not run.
Ratings come from the manufacturer's testing to the standards listed. A rating tells you what the product was tested to do, not whether it is right for a specific task.
Size Chart
| Size | Small | Medium | Large | X - Large | 2X - Large |
| Palm Circumference | 7" | 8" | 9" | 10" | 11" |
*OS (One Size) gloves follow standard medium sizing
Inventory
| Variant | SKU | Barcode | Availability |
|---|---|---|---|
| 7 / S / 8 Pair Pack | 52581 | 810189893801 | In stock |
| 8 / M / 8 Pair Pack | 52582 | 810189893818 | In stock |
| 9 / L / 8 Pair Pack | 52583 | 810189893825 | In stock |
FAQ
Not for cut hazards. These are general purpose grip gloves, compliant with EN 388: 2131X. That means abrasion level 2, coup cut level 1, tear level 3 and puncture level 1. The X means the TDM cut test was not done. They carry no ANSI/ISEA 105 cut level. For cut hazards, choose our A1, A4, or A5 cut resistant gloves.
EN 388 is the European standard for mechanical protection. The four numbers and letters rate, in order, abrasion, cut (Coup test), tear, and puncture, and a final letter is the ISO 13997 cut rating from A to F. Higher numbers and letters mean more protection.
A latex palm coating gives you a secure hold in wet and rough conditions while keeping your fingers free to move. The coating is on the palm and fingers where you need grip, and the back stays breathable.
Yes. Hand wash in cool water with mild soap and let them air dry. Skip the dryer and harsh heat, which can stiffen the coating and shrink the knit.
Measure around your palm at the widest point and match it to the size chart on this page. A snug fit gives the best grip and dexterity, while too loose reduces feel and control.
Don't see the answer you are looking for? Contact us